Operation Manual

21
User Manual
2
Before You Begin
This chapter provides basic information to get you start using the chart plotter; it
will help you to become familiar with the chart display and the functions of the controls
before you start using the chart plotter.
2.1 THE KEYBOARD
The 'CONTRAST'/'BACKLIGHT'/'POWER' key
Press and hold the right side of 'POWER' for 1 second to turn the chart plotter
On. Press and hold the right side of 'POWER' down (once the chart plotter has been
turned On) for 3 seconds turns the chart plotter Off.
Press and immediately release the right side of 'POWER' to adjust the backlight,
press and immediately release the left side of 'POWER' to adjust the contrast of the display.
The key
Press 'MENU' to select the Functions Menu.
The key
Place the cursor and press 'GO-TO' to set Target.
The key
Press '<PAGE>' to select the configuration you wish.
The key
Press '<MODE>' to select Charting or Navigation (Home).
Nota
If the "Selectable Nav 3D" item in the Navigation menu (see Par. 5.3) is set, by pressing '<MODE>' it is possible
to select the following modes: Charting, Navigation (Home), Navigation (Home) in 3D, Charting in 3D. Any time
the key is pressed, a message describing the newly selected mode is shown on the center of the screen for about 2 seconds.
Also it is possible to select the 3D mode, or Perspective View, from menu, see Par. 3.5.1.1.