Operation Manual

41
User Manual
'GO-TO'. When the ship arrives to the Destination point, navigation follows to the next
point (if existed).
3.4 NAVIGATING TO A SINGLE DESTINATION
3.4.1 DISTANCE AND BEARING TO TARGET
Once you have positioned the cursor on your desired location (a generic point on
the map) press 'GO-TO'.
Fig. 3.4.1 - Navigation to a single destination
On the screen is shown a straight line connecting the Target (called DEST) with
the ship's position and an information window with Target position, that disappears when
the cursor is moved from the Target. When the Target is placed, all navigation data are
referred to this Target.
Note
When the chart plotter is turned Off, the Target does not remain in memory.
3.4.2 TIME TO GO
When the Target is set the TTG value is displayed in the Graphic Data Page:
'PAGE' more times to select the Graphic Data page
Note
If SOG value is less than 1.0 knots or the BRG is greater than 90 degrees, the TTG value is not displayed.
3.4.3 DELETING TARGET
Place cursor on Target icon, press 'CLEAR': the symbol identifies Target disap-
pears from the screen.
Otherwise (when the cursor is placed in a generic position on the chart) press