Operation Manual

90
User Manual
5.2.7 DEAD RECKONING
Enables (On) or disables (Off) the Dead Reckoning. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "DEAD
RECKONING" + 'ENTER'
5.2.8 STATIC NAVIGATION
Sets up a threshold for the speed. When the speed received from the positioning
device is under that threshold, the chart plotter displays zero speed. The default value is 0.0
Knots.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "STATIC
NAVIGATION" + 'ENTER'
5.3 NAVIGATE
The Navigate menu allows to handle functions related to navigation.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER'
5.3.1 COORDINATE SYSTEM
Sets your preferred Coordinate System among ddd mm ss, ddd mm.mm, ddd
mm.mmm, UTM, OSGB, TD. The default setting is ddd mm.mmm.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"COORDINATE SYSTEM" + 'ENTER'
If TD has been selected a new menu is shown on the screen:
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"COORDINATE SYSTEM" + 'ENTER' + "TD" + 'ENTER'
Chain: Selects the preferred chain. The default setting is 9970.
Pair: Selects the pair of stations in the selected chain. The default setting is W X.
ASF 1/2: Sets the ASF (Additional Second Factor) for the slave in the selected chain. The
default setting is 0.
Alter: Turns On/Off the Alternate Solution in the chain. The default setting is Off.
5.3.2 FIX DATUM
Sets the datum reference used by the GPS receiver connected to (or integrated in)
the chart plotter so that the chart plotter converts the position received from the GPS to the
Map Datum currently selected in the menu in order to match the position from the GPS
with the position on the charts. You must know what datum reference is used by the GPS
and set it in the Fix Datum option. WGS 1984 is the default Fix Datum.