Quick Start Guide

3. Inser
t the four tabs from the horizontal
or vertical bracket into the the mounting
bracket as shown in Figure 4. Make sure to
insert in the desired direction.
4. Pr
ess the mounting bracket down. A *click*
sound will indicate that the br
ackets are
locked in.
Figur
e 4
Notes:
• Y
ou can only attach one angled
bracket to the mounting bracket.
• If y
ou would like to change the
direction of the angled bracket
after attaching it to the mounting
bracket, gently but rmly pull
them apart.
B451AJ_QSG_EN_R1.indd 13 2020-11-03 11:42:55 AM2020-11-03 11:42:55 AM