Quick Start Guide

Wiring the doorbell

o wire the doorbell:

1. Loosen the power por

t screws of the

doorbell with a Philips-head scr

ewdriver.

Figur

e 2

Figure 1

2. Loop the power wires underneath the

power port screws (see Figure 1).

3. Tighten the power port screws to secure

the power wires (see Figure 2).

Note: Do not fully r

emove the

power port screws.

B451AJ_QSG_EN_R1.indd 16 2020-11-03 11:43:00 AM2020-11-03 11:43:00 AM