User manual

- 8 -
b) Port: The DVR/Monitor port entry is 5000 (by default) for Local and
Remote Network viewing.
c) ID: The User ID entry is admin by default and cannot exceed a
maximum of 5 characters, lowercase.
d) VIDEO: Choose the NTSC format (North America).
3 Press OK to continue.
4.2 Viewing the Cameras
PROCEDURE
1 Click on the connect icon
to connect to the DVR/Monitor for Network Viewing.
2 Enter the User ID and password. Note each cannot exceed 5 characters, lower case.
The default User ID is admin. The default password is admin.
Figure 8: Login Screen
3 Press OK
If the setup is properly done, the cameras will appear on the screen (see Figure 9, page 8).
Figure 9: Remote Camera Views
NOTE If your DVR/Monitor is behind a router, you need to open 4 ports on the router, related
to the main port.
For example: If you set up port 5000 on the Netviewer you need to open ports 5000,
5001, 5002 and 5003 in the router in order to connect remotely over the internet.