- LOREX L19lD1616501 19" LCD COLOR OBSERVATION SYSTEM with Built-in 16 Channel Triplex Instruction Manual

43
EXTERNAL DEVICE
minute). Use the Mouse Wheel to change
the value.
4. REGISTER - Connect to the DDNS server
and register the system information to the
server. Click REGISTER to start the
registration.
5. DNS STATUS - Indicates the current status
of DDNS connection
• IP ADDRESS: Indicates the current IP
address recorded in the server
• IP PORT: Indicates the current IP port
recorded in the server.
• REMAIN TIME: Indicates the remaining
time until the next connection to the
server.
6. LAST REGISTRATION DATE - Displays
the time of the last registration.
TCP/IP SETUP - SPEED
Controls the system bandwidth use (network
speed). Settings between 1 (low) ~ 9 (high)
PAN/TILT SETUP - COMMAND
SETUP
1. CHANNEL - Select the channel for PTZ
(PAn/TILT/ZOOM) Camera control. PTZ
Camera is not included with the system.
2. MODEL - Select PTZ protocol.
3. PTZ ID - Select PTZ ID.
4. BAUDRATE - Select Baud Rate of PTZ
control code.
5. CMD DELAY - Set up a delay time to run
the command.
6. COMMAND - Pick up PTZ CMD.
7. LENGTH - Displays the length of PTZ
control code.
8. CODE - The control code of PTZ CMD.