Wireless 4 Channel Receiver with 2 Night Vision cameras Instruction Manual English Version 3.0 MODEL: SHS-4WLS www.lorexcctv.com Copyright © 2007 LOREX Technology Inc.
Thank you for purchasing the SHS-4WLS. Lorex is committed to providing our customers with a high quality, reliable security product. The SHS-4WLS Video Surveillance System with 2 Indoor/Outdoor Night Vision Cameras is easy to set up (connects to any TV, VCR or Monitor) making this security system perfect for protecting your home, family and personal property.
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1.
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Cleaning - Unplug the video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 14.
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage.
Table of Contents Table of Contents Important Safeguards ............................................................................... 3 General Precautions ................................................................................. 5 Table of Contents ...................................................................................... 6 SHS-4WLS Features ................................................................................ 6 Getting Started ............................................
Getting Started Getting Started The SHS-4WLS comes with the following components: 4-Channel Wireless Receiver Remote Control Receiver Power Adapter 2 x Weatherproof Color Day/Night IR Cameras with Stands AV Cable 2 x Camera Power Adapters CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
SHS-4WLS - Front View SHS-4WLS - Front View ANTENNA CHANNEL BUTTON Press to cycle through available cameras. LED CHANNEL DISPLAY Shows the currently displayed channel number. IR SIGNAL RECEIVING WINDOW Receives the Infrared signal from the Remote Control.
Remote Control Remote Control Listed below is a quick reference for the Remote Control. CHANNEL BUTTONS Press to choose a specific camera by number: CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 LOCK / UNLOCK BUTTON Locks the SHS system against accidental button press on the Remote Control. Press the button once to LOCK or UNLOCK the SHS-4WLS system. LOOPING BUTTON Sets LOOPING display: 1. Press the button once to enable LOOPING. 2. Press buttons 1~4 to input two or more channels to be looped 3.
SHS-4WLS Cameras SHS-4WLS Cameras The SHS-4WLS switcher includes 2 CMOS Color Indoor/Outdoor Wireless Cameras* INFRARED-RED LEDs Provides illumination for low light conditions CAMERA LENS MICROPHONE STAND Metal stand connects to the Camera for mounting to walls, ceilings and other surfaces POWER CABLE (BACK) Connects power to the camera via the power adapter MICROPHONE SWITCH The default Microphone Switch is “On”. * Picture changes from Color to B&W under low light conditions on Night Vision Cameras Only.
Connecting the SHS-4WLS A/V Cable Connecting the SHS-4WLS A/V Cable Connect the Video and Audio Cables to the matching color ports on the SHS-4WLS Switcher. Connect the cable to the TV, VCR or Monitor. TV / VCR / MONITOR Connect the Video and Audio Cables to the matching color ports. SHS-4WLS Connect the Video and Audio Cables to the matching color ports.
SHS-4WLS System Specifications - Appendix #1 SHS-4WLS System Specifications - Appendix #1 Receiver Specifications Receiving Frequency ISM 2,400 MHz ~ 2,483 MHz Intermediate Frequency / Demodulation Type 480 MHz / FM Antenna Patch Antenna Receiving Sensitivity < -85 dBm Video Output Signal Level 1.0 V @ 75ohm, S/N>38dB Audio Output Signal Level 1.0 V @ 600ohm Power Supply 12V DC / 300mA Unobstructed Effective Range 300 ft. (100m) (Maximum) Dimensions (W x D x H) 4” x 5.7” x 1.
It’s all on the web Product Information Specification Sheets User Manuals Software Upgrades Quick Start Guides Firmware Upgrades VISIT www.lorexcctv.com www.lorexcctv.com Lorex Technology Inc.
