User manual

INTRODUCTION:

Congratulations on your purchase of this Vision Q Vandal Proof B&W Dome Camera. This Dome camera comes with

a Polycarbonate construction to provide high impact protection. The heavy duty all metal base with swivel

bracket and tamper proof hardware adds extra protection against possible vandalism. This Dome camera can be

tilted 90° for optimum angle selection.

CONNECTING VISION Q CAMERA TO A 2 PAGE / 8 CHANNEL QUAD OBSERVATION SYSTEM

1. Mount the camera to the ceiling.

2. Connect the video extension cable (not included) from the camera to the monitor.

3. Connect the power extension cable (not included) to the supplied power 12V DC adaptor.

4. Attach the video extension cable to the monitor’s camera inputs (see diagram below).

5. Attach the supplied 12V DC power supply to the power extension cable (not included) and plug into

an electrical outlet.

6. Turn your monitor ON and select the desired channel to see the picture.

7. Repeat above procedures for connecting all 3 cameras to the monitor.

CONNECTING CAMERA TO A SINGLE PAGE QUAD OBSERVATION SYSTEM

1. Mount the camera to the ceiling.

2. Connect the video extension cable (not included) from the camera to the monitor.

3. Connect the power extension cable (not included) to the supplied power 12V DC adaptor.

4. Attach the video extension cable to the monitor’s camera inputs (see diagram below).

5. Attach the supplied 12V DC power supply to the power extension cable (not included) and plug

into an electrical outlet.

6. Turn your monitor ON and select the desired channel to see the picture.

7. Repeat above procedures for connecting all 3 cameras to the monitor.

BACK VIEW OF 2 PAGE 8 CHANNEL QUAD MONITOR

BNC INPUTS

VANDALPROOF

B&W DOME CAMERA

VIDEO EXTENSION CABLE

(NOT INCLUDED)

CAMERA 1

CAMERA 2

CAMERA 3

BACK VIEW OF SINGLE PAGE QUAD MONITOR