Owner's Manual

3. TRACKING

3.1 HORIZONTAL

- This item is used to move the screen display

to the left or right.

- The HORIZONTAL can be adjusted from 0-100.

4. SETUP

3.2 VERTICAL

- This item is used to move the screen display

up or down.

- The VERTICAL can be adjusted from 0-100.

3.3 CLOCK/PHASE/SHARPNESS

- Press UP or DOWN button to select CLOCK,

PHASE or SHARPNESS and press [MENU] button to

confirm, then press + or - button to adjust.

- The CLOCK/PHASE can be adjusted from 0-100.

- The SHARPNESS can be adjusted from 0-10.

4.1 LANGUAGE

This item is used to set the OSD language. In this unit ,

you can set the language to English or other languages.

4.2 OSD POSITION

- This item is used to set the OSD menu position on

the screen.

- Adjust the HORIZONTAL/VERTICAL item to move the

OSD menu to left or right / up or down.

- The HORIZONTAL/VERTICAL can be adjusted from 0-100.

4.3 WHITE BALANCE

- Set the white balance to NO or YES.

4.4 DCR (Dynamic Contrast Ratio)

- Set the DCR item to ON or OFF.

4.5 4:3 OR WIDE

- Set the screen display mode to 4:3/WIDE.

4.6 FACTORY RESET

- Used to reset monitor to factory settings.

(Excluding the OSD LANGUAGE.)