Owner's Manual

46
Using the Main Menu
Configuring mobile connectivity
settings
To remotely view your DVR using a
mobile device, you must port forward
the mobile port (by default port 1025) to
your router, and enter the mobile port
number in the DVR.
To configure mobile connectivity
settings
:
1 F
rom the Device menu, click Mobile.
2 Ent
er a new user name and password if
you want to change your mobile login
password. By default, the user name is
admin, and the password is 0000.
• The default Mobile port is 1
025. This must
be port forwarded on your router to enable
remote access.
3 T
o change the Mobile port, click the field
beside Server Port to enter a new port.
To configure Motion settings:
1 F
rom the Device menu, click Motion.
2 Configur
e the following:
• Channel:
Select the channel you wish to
apply the settings to.
• Motion Detect: Select Enable to activate
motion detection.
• Sensitivity: Select the sensitivity of the
motion detection trigger. The greater the
number, the greater the sensitivity.
• Area: Click Setup to open a motion
detection grid. The motion detection grid
allows you to select the area of where you
want the system to monitor motion.
Mobile
Motion