Quick Start Guide

Device Setup
1. Plug the USB power cable into the extender/repeater. Then plug the power adapter into
a wall outlet to power on.
Note: The LED light will ash blue when ready to pair.
2. Unlock the Lorex Home Center and tap on Device Manager in the homescreen.
3. Go to the Repeater tab, then tap + on the top right to pair.
4. In the Device Setup screen, tap Repeater and tap Next.
5. Once your device has been detected, tap Next.
The Lorex Home Center will now display the extender/repeater on your homescreen.
Attention: Setup the Lorex Home Center before going through these steps.