User's Manual

Lens Installation

Protection Cap

C-mount adapter

The lens on the Camera can be changed to one of the

following types:

Installing C-MOUNT LENS

1. Removing the Protection Cap

2. Screw the new lens onto the camera by turning

clockwise.

Installing CS-MOUNT LENS

1. Remove the Protection Cap and C-Mount Adapter.

2. Screw the lens onto the camera by turning

clockwise.

Installing AUTO IRIS LENS

1. Removing the Protection Cap.

2. Screw the lens onto the camera by turning

clockwise.

3. Connect the Auto Iris Lens Power Cable to the Auto

Iris Lens Connector on the rear of the camera.

4. Set the DC/VIDEO Selection Switch to either “DC”

or “VIDEO” (depending on the type of lens). Set the

EE/AI Selection Switch to AI when using an Auto Iris

Lens.

CS-Mount Lens

Auto Iris Lens Power Connector

Lens Switches