User's Manual

ManualsBrandsLorex ManualsHome Security SystemLorex DCC1020

Camera Features

• Patented Mirroring Technology Makes Camera Invisible to the Human Eye Yet Allows The

Camera to Properly View

• Security Mirror Form Factor is Ideal

for Commercial/Retail Applications

• Cable Pass-through Wall Mount

Bracket Conceals and Protects

Connection Cables

• Ceiling flush mountable or wall

mountable using included cable pass-

through bracket.

Package Contents

WARNING - REGULATED 12V DC 500mA power supply is provided for use with this camera. Use of

a non-regulated, non-conforming power supply can damage this product and will void the warranty.

1 x Color Concealed Security Mirror

Camera with Mounting Stand

1 x HEX Adjustment Key

(For Mounting Stand)

Ceiling Flush

Mount

Wall Mount

Summary of content (5 pages)

PAGE 1
Camera Features Camera Features • • • • Patented Mirroring Technology Makes Camera Invisible to the Human Eye Yet Allows The Camera to Properly View Security Mirror Form Factor is Ideal for Commercial/Retail Applications Cable Pass-through Wall Mount Bracket Conceals and Protects Connection Cables Ceiling flush mountable or wall mountable using included cable passthrough bracket.
PAGE 2
Mounting Options Mounting Options The Camera can be installed to a wall or ceiling, or can be ceiling flush mounted using included cable pass-through bracket. Wall Mounting: 1. Mount the camera to the desired mounting surface by firmly attaching the Mounting Bracket using 4 screws (at points listed as Screws 1~4 on the below diagram). 2. Use the Hex Adjustment Key to set the desired angle of the camera (at points A, B and C on the above diagram). 3. Connect the Extension cable to the camera.
PAGE 3
Installing the Camera & Optional Extension Cable Ceiling Mounting: 1. Remove the Mounting Bracket from the back of the Camera (4 screws) 1 2. Drill a hole in the ceiling large enough to pass the BNC/Power Cable through. NOTE: If using the Ceiling Mounting method, run the Extension Cable to the location prior to mounting the Camera. 3. Connect the BNC/Power Cable end of the Camera to the BNC/Power connections on the Extension cable before installing the Camera Base. 4 4.
PAGE 4
Installing the Camera & Optional Extension Cable Installing the Camera & Optional Extension Cable 1. Connect the optional Extension cable to the Camera: • Connect the BNC & Power ends of the cable to the Camera • Connect the Power Adaptor connector to the AC Power Cable attached to the camera. Remember to check the ends of the cable before permanent installation, as the power connection ends are different (one side has a female barrel power connection, and one end has a male power plug.
PAGE 5
Camera Specifications Camera Specifications Image Sensor Type Video Format Effective Pixels Horizontal Resolution Scan System Sync System S/N Ratio Iris AES Shutter Speed Min Illumination Video Output Audio Output Lens / Focal Length FOV (Diagonal) Termination IR LED / Night Vision Range Power Requirement Power Consumption Operating Temperature 6 1/3” Color CCD Image Sensor NTSC 510H x 492V (251K) 420 TV Lines 525 Lines 2:1 Interlace Internal More than 52dB without AGC AES 1/60 ~ 1/120,000 0.