Quick Start Manual

FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
Contents
•Weatherproof HD-SDI IR bullet camera*
•Mounting screws x 4 / allen key x 1*
•mini-RG59 BNC / power extension cable*
•Power adapter**
Copyright © 2013 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
Camera Specifications
Image Sensor 1/2.9” 2.4 Megapixel CMOS Sensor (16:9)
Video Format NTSC
Effective Pixels H: 1984 V:1105
Resolution Up to 1920 x 1080p @ 30fps
Scan System Progressive
Sync System Internal
S / N Ratio >50dB
Iris AES
AES Shutter Speed 1/1 ~ 1/60,000 sec.
Min. Illumination 0.5 Lux without IR LED
0 Lux with IR LED
Video Output HD-SDI - 800mVpp @ 75ohm
Lens / Lens Type 3.7mm F2.5 / Fixed
FOV (Diagonal) 106°
Termination BNC Type (HD-SDI)
IR LED Qty. / Type 24 pieces / 850nm
Night Vision Range* 100ft (30m) / 155ft (48m)
Power Requirement 12V DC ±10%
Power Consumption Max. 390mA (w/IR)
Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C
Operating Humidity Range < 90% RH
Indoor/Outdoor** Both (IP66)
Weight (including stand) 1.3lbs / 0.6kg
* Stated IR illumination range is based on ideal conditions in total darkness and in typical outdoor
night time ambient lighting. Actual range and image clarity depends on installation location, viewing
area and light reflection / absorption level of object.
** Not intended for submersion in water. Installation in a sheltered location recommended.
WARNING - A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Features
• 1080p (1920x1080) Megapixel CMOS Image Sensor
• Megapixel lens for superior detail
• Automatic infrared filter ensures true color in all lighting
conditions
• ClearNight imaging technology ensures clear night vision and
improves recording efficiency
• Night Vision up to 100ft (30m) away in total darkness and up to
155ft (48m) away in typical night time ambient lighting*
• Cable pass-through wall-mount bracket protects connection
cables
• Weatherproof (IP66) rated housing for indoor/outdoor
installations**
Disclaimers:
* Stated IR illumination range is based on ideal conditions in total darkness and in typical outdoor
night time ambient lighting. Actual range and image clarity depends on installation location,
viewing area and light reflection / absorption level of object.
** Not intended for submersion in water. Installation in a sheltered location recommended.
Warning/Caution
• Read this guide carefully and keep it for future reference
• Follow all instructions for safe use of the product and handle
with care
• Use the camera within given temperature, humidity and voltage
levels noted in Camera Specifications
• Do not disassemble the camera
• Do not point the camera directly towards the sun or a source of
intense light
• Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
• Periodic cleaning may be required. Use a damp cloth only. Do
not use harsh cleaners or aerosol cleaners.
• The supplied extension cable is rated for surface mounting only
• Cables for in-wall / floor-to-floor installations are sold separately
Installation Tips
• Point the camera where there is the least amount of obstructions (i.e. tree
branches)
• Install the camera in a location that is difficult for vandals to reach
• Secure cabling so that it is not exposed or easily cut
• Camera rated for outdoor use. Installation in a sheltered location
recommended
HIGH DEFINITION SDI 1080P BULLET CAMERA
Quick Start Guide
English Version 2.0
LBCHD2051 SERIES
Dimensions
ATTENTION - This camera includes an Auto Mechanical IR Cut Filter. When
the camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and indicates
that the camera filter is working.
*Model LBCHD2051PK2 is a 2-pack that includes two of the listed items.
** A “2-in-1” Power Adapter that provides power to two cameras may be substituted for
individual power adapters, depending on product configuration.
253mm / 8.5”
122mm / 4.8”
88mm
3.5”