User's Manual

3. SENSOR/ALARM
This submenu allows you to configure the
recording parameters under the Alarm condition.
(i) BUZZER: Select the buzzer ON or OFF when
the alarm is activated
(ii) ALARM RECORD DURATION: Selects how
long the DVR will automatically record after an
alarm is triggered. Available duration times
are: OFF, 05, 10, 15, 20, 25, 30, 35, 40, 45,
50, 55, 60, 90, 120, 150, 180, 210 AND 240
seconds
SENSOR / ALARM SET-UP
BUZZER ON
ALARM RECORD DURATION 10
ALARM OUTPUT DURATION OFF
ALARM INPUT:
CAMERA 1 OFF
CAMERA 2 OFF
CAMERA 3 OFF
CAMERA 4 OFF
PRESS (
cd), THEN (SELECT)
PRESS (MENU) TO EXIT
YEAR MM / DD HH MM RECORD TIME
O1 20 .. .. / .. .. : .. .. . ..
02 20 .. .. / .. .. : .. .. . ..
03 20 .. .. / .. .. : .. .. . ..
04 20 .. .. / .. .. : .. .. . ..
05 20 .. .. / .. .. : .. .. . ..
06 20 .. .. / .. .. : .. .. . ..
07 20 .. .. / .. .. : .. .. . ..
08 20 .. .. / .. .. : .. .. . ..
09 20 .. .. / .. .. : .. .. . ..
10 20 .. .. / .. .. : .. .. . ..
PRESS (
cd), THEN (SELECT)
PRESS (MENU) TO EXIT
(VI) SET BY DAY: Set the scheduled recording
time by the selected day. You can program
up to 30 scheduled recordings. Under the
Record-Time you can also choose to ADD or
DEL (Delete) once you’ve made the selection
Example: 01 2005 04/01 22:40 09:10 ADD
This means that recording will take place on
April.1, 2005 at 10:40 pm to April.2, 2005 to
7:50 am for 9 hours and 10 minutes
• After setting the DAY, choose ADD and
press the SELECT button
Note: HH is based on a 24 hour clock
4. RECORD SETTING
This submenu allows you to set the Record
parameters for your Hard Disk Drive. Use this
section to configure your record settings. The
selected FPS and Quality will determine how
long the DVR will record for. Use the chart in
Appendix #2 to select the appropriate settings
(i) RECORD MODE: Set to record a Full Screen
or Quad screen
(ii) RECORD QUALITY: Sets the quality level of
recording. Available settings are: NORMAL,
HIGH, LOW. The default setting is: NORMAL.
RECORD SETTING
RECORD MODE EACH
RECORD QUALITY NORMAL
RECORD FPS 30
RECORD CAM 1 OFF
RECORDCAM 2 OFF
RECORDCAM 3 OFF
RECORDCAM 4 OFF
PRESS (
cd), THEN (SELECT)
PRESS (MENU) TO EXIT
(iii) ALARM OUTPUT DURATION: Selects how long the DVR will automatically record after
an output alarm is triggered. Available duration times are: OFF, CONT, 05, 10, 15, 20,
25, 30, 35, 40, 45, 50, 55, 60, 90, 120, 150, 180, 210 AND 240 seconds
(iv) ALARM INPUT: Select the type of alarm input for each camera, OFF, N/O (Normally
Open) or N/C (Normally Closed). The alarm inputs are set up at the back of the DVR,
labelled “SEN1 – SEN4” (Sensor 1 – Sensor 4)
-10-