User's Manual

How do I connect DIN cameras to the system?

What is DVR Mode and how do I use is?

DVR Mode is the primary mode for the System, and is displayed when the system is

powered on. In DVR Mode, the system performs the following functions:

• View and Record live video channels in Single, Quad, Multi-Display or Sequence

Mode.

• Customize the recording on up to 8 camera channels in continuous, motion or alarm

recording modes.

• Archive data to USB Thumbstick, USB Hard Drive, CDRW/DVD-RW or Network

Storage through FTP.

• Search through Previously Recorded Events

• Customize the Display, Cameras and System to best suit your security needs

through the user friendly System Menu GUI (Graphical User Interface).

NOTE: The DVR will continue to record independently of the current Monitor Mode.

To return to DVR Mode (from any other Mode):

Front Panel:

1. Press the Multi-Function Mode Button on the Front Panel.

2. Use the Up and Down arrows on the Navigation Control to select DVR.

3. Press the Enter button on the Navigation Control to switch to DVR Mode.

Remote:

1. Press the DVR Button on the Remote Control -or-

2. Press the Mode button on the Remote Control. Use the arrows to select DVR, and press

the Enter button.