Installation Guide

LH010 ECO BlackBox Series Quick Setup Guide - English - R1
4. Enter the following information in each field:
5. Click Login to access your DVR. Lorex Client 11 connects to your
DVR and streams live video from your cameras.
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 20 Minutes
Time: 20 Minutes
Hand Tools Skills - Easy
Skills - Easy
BASIC INSTALLATION GUIDE
BASIC INSTALLATION GUIDE
BASIC INSTALLATION GUIDE
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Digital Video Surveillance Recorder
ECO BlackBox LH010 Series
Quick Setup Guide
ATTENTION:
• ThisguiderefersonlytotheDVRset-up.
• Monitorandcamerasarenotincluded.
• Broadbandrouterandcomputerarerequiredforlocalandremotemonitoring
(not included).
Informationinthisdocumentissubjecttochangewithoutnotice.As
ourproductsaresubjecttocontinuousimprovement,LorexTechnology
Inc.andoursubsidiariesreservetherighttomodifyproductdesign,
specificationsandprices,withoutnoticeandwithoutincurringany
obligation.E&OE©2012LOREX.Allrightsreserved.
* For setup of Instant Mobile Viewing
refer to your Instruction Manual.
It’sallontheWeb
Time: 30 Minutes
Skills - IntermediateHardware:
PC/Router
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Congratulations!Youcannowview&playbackvideoonyoursystemviaLAN.
1xDigitalVideoRecorderwithpre-installedHDD*
1 x USB mouse
1 x Power adapter
1 x Remote control
1xEthernetcable
1 x Instruction manual
1 x Quick start guide
1 x CD
PACKAGE CONTENTS:
Connecting the USB Mouse
2
Connect the USB mouse to either the USB port on the front
panelortheonelocatedatthebackoftheDVR.
Front Panel USB port Back Panel USB port
4
Connecting the Ethernet Cable
Connect one end of the
Ethernetcabletoanavailable
LANportofyourrouter(not
included) and the other end to
the DVR’s LAN port.
2
Using a Mouse (Recommended)
1:Left-button:Clicktoselectamenu
option;duringliveviewinginsplit-
screen,double-clickonachannel
to view the selected channel in
full-screen;double-clickthechannel
againtoreturntosplit-screenview.
2:Right-button:Clicktoopenthe
MenuBarortoexitfromamenu.
3:Scroll-wheel:Nofunction.
1 2
3
YouhavecompletedSTEPS1&2successfully.YourDVRis
nowreadytouse.RefertotheInstructionManualtolearn
howtorecord,playback,searchandforallotherfeatures
availablewiththisDVR.
Managing Passwords
Bydefault,passwordsaredisabledonthesystem.
You do not need to enter a password when accessing the
MenuBarorMainMenu.However,youmaybeaskedfor
a password to access certain functions.
7
NOTE: For security purposes, it is highly recommended to
enable passwords on the system using the Password Menu.
Please refer to the instruction manual for more information.
NOTE: By default, the
username is admin and
password is 000000.
Connecting Cameras (not included)
1
ConnectBNCcamerastothe
BNCports(VIDEO INPUT) on
the rear panel.
NOTE:Testthecameraspriorto
selecting a permanent mounting
locationbytemporarily
connecting the cameras and
cablestoyourDVR.
NOTE: If the mouse curser
doesnotappearonscreen,
please press “0” three times
on the remote control to switch
betweenVGAandBNC.
NOTE:Thefourchannel
model is shown.
Connect to your DVR using Lorex Client 11 (LOCALLY)
BASICSETUPBASICSETUP NAVIGATIONANDCONTROLS SET-UPLOCALVIEWINGONYOURPC
Continued
STEP1
STEP2
STEP3
STEP1
3a
ConnectaVGAcable(not
included) from a monitor or
TVtotheVGA port on the
rear panel of the DVR.
3b
From one of the VIDEO
OUTPUTportsconnectaBNC
terminatedcable(notincluded)
toaTVorCCTVmonitor.
OR
Connecting a Monitor
TheECOBlackBoxfeaturestwooptionsforconnectingtoamonitor.
Powering ON the DVR
5
ConnectthepowercabletotheDC
12V port on the rear panel and
the power cord into an electrical
outlet.TheDVRwillautomatically
turn on once power is connected.
16 channel models: turn the power
switch,locatedonthebackpanel,to
the“ON”position.
Atstartup,thesystemperformsabasicsystemcheckandruns
aninitialloadingsequence.Afterafewmoments,thesystem
loads a live display view.
NOTE:Makesureallcamerasandcablesareproperlyconnected
prior to powering on the system.
Using the Main Menu
Right-clickanywhereon-screentoopentheSub-Menuandselect
MAIN MENU(mouseonly),orpressthe buttononthe
remote control.
1
5
6
7
8
1
2
3
4
1. Display
2.Search
3.Alarm
4. System
5. Record
6.Network
7. Device
8.Advanced
It is important to set the correct time to assure accurate time
stamps on video recordings.
Setting the Date & Time
1.Movethemousecursortothebottomofthescreento
openthemenubarandselectMAIN MENU.
2.ClickSYSTEM.
3. Configure the Date & Time and press APPLY to save
your settings. Click APPLY.Tofinish,pressOK.
6
NOTE:
A pop-up key
pad will open.
When you
have selected
the desired
date, press the
button to
confirm.
Recordtheinformationinthesectionbelow:
IPADDRESS: _______._______ ._______._______
MACADDRESS: _____:_____:_____:_____:_____:____
CLIENTPORT: ___________
(RequiredforDDNSregistration)
Retrieve the DVR Information
1
Thisstepwillteachyouhowtolocally
viewyoursystemovertheLAN(local
area network) using your PC.
NOTE:Thismethodonlyworksifyour
computer is on the same network as the DVR.
TorecordyourIPAddress,MACAddress
andClientPort,rightclickanywhereon
the screen and select Main Menu. From
there,selectSystem and then Info.
CHECK OUR WEBSITE FOR LATEST DVR SOFTWARE
FIRMWARE UPGRADES, VIDEOS & DOCUMENTATION.
www.lorextechnology.com
* Contentmayvarybymodel,includingnumberofchannels/portconfigurationand
HDD (hard disk drive) capacity. Check your package for specific content information.
IP Address: Enter the local IP
address of your DVR.
User Name:Thedefaultuser
name is admin.
Password:Bydefault,the
password is left blank.
Client Port:Bydefault,thisis
9000.
Other Control Options
TheDVRcanalsobecontrolledusingtheincludedremotecontrol.
Please refer to the instruction manual for more information.
3
*remotecontrolmaynotbeexactlyasshown
2
1. Insert the system’s software CD into your computer.
2.Followtheon-screeninstructionstoinstallLorex Client
Software - PC.
3.Onceinstalled,double-clickontheLorex Client 11
iconfromyourdesktop.TheDVRloginscreenwillappear.