Installation Guide

Package Contents
High Definition Wireless Security Camera System
LH050/LH070 Series
30 minutes
Firmware Update
This system features automatic firmware upgrades for
enhanced functionality. It is required to upgrade your
system to the latest firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear asking you to
upgrade the firmware. Click Yes to upgrade.
2. Enter the system user name (default: admin) and
password (default: 000000) and click Apply.
Wait for the firmware update to complete. The system
will restart once the firmware has been upgraded. DO
NOT power off or disconnect the power cable
during firmware installation.
Quick Connection Guide
LH050_LH070_SERIES_QCG_EN_R1
Information in this document is subject to change without notice.
As our products are subject to continuous improvement, Lorex
Corporation and our subsidiaries reserve the right to modify
product design, specifications and prices, without notice and
without incurring any obligation. E&OE © 2016 LOREX. All
rights reserved.
HDMI Cable
Quick Start Guides
Ethernet Cable
USB Mouse
Remote Control
Digital Video Recorder
Docking Stand
Power adapter
Connecting your system
1
Power
2 3 54
OR
Wireless cameras*Monitor*
Router* Mouse
HDMIVGA*
Wireless receiver*
Connecting DVR to Docking Stand
• Position the DVR over the docking
stand. Push down on the DVR until
you hear a ‘click‘.
click
*Not included/sold separately.
For the best video output this
DVR can provide, you must
use it with a monitor/TV that
supports 1080p resolution
(or above).
!
Need Help?
Visit us online for up-to-date software and
complete instruction manuals.
Click on the Downloads tab
1
4
Click on your product in the search results
1
3
Search the model number of your product
1
2
Visit www.lorextechnology.com
1
1
LH050_LH070_SERIES_QCG_EN_R1.indd 1 6/13/2016 4:09:58 PM