4MP Super HD DVR - Quick Network Setup

c
Before You Start:
• Make sure you
have a router
and high-speed
Internet access
(not included).
LHA4100 / LHA4200 SERIES
Congratulations! You can now view video from your cameras on your PC or Mac.
• Connect your DVR
to your router
using an Ethernet
cable (see the
Quick Connection
Guide for details).
• Upgrade your DVR
firmware and client
software or mobile
app to the latest
versions.
LHA4100_LHA4200_SERIES_QNG_EN_R1
PC / Mac Setup
a
• PC Users: Download and install FLIR Client 12 for
PC from lorextechnology.com/support.
Download and install the client software:
• Mac Users: Download and install FLIR Client 12
for Mac from lorextechnology.com/support.
Double-click to extract the software, then drag
the software to Applications.
b
c
Click Login.
d
Double-click the FLIR Client 12 icon ( )
on the desktop or Applications list.
Enter the
DVR’s Device
ID recorded in
section 1
Find Your Device ID
Record your information below:
DEVICE ID:
2
The Device ID is printed on a label on the top panel of the DVR.
Device ID: xxxxxxxxxxx
1
2
• Please note that an upload
speed of 2 Mbps is required
for remote video streaming
(3 Mbps and above
recommended). Up to 3
devices may connect to the
system at the same time.
Enter the following information:
Enter the DVR’s
Client Port
(default: 9000)
Enter the DVR’s
user name
(default: admin)
Enter the secure
password you
created for the
DVR
e
All connected cameras are shown
on screen in the FLIR Client 12 home
screen.
NOTE: For full instructions on how to
use the FLIR Client 12 software for PC
and Mac, see your DVR’s instruction
manual at lorextechnology.com.
HD Digital Video Surveillance Recorder
LHA4100 / LHA4200 Series
Quick Networking Guide