Full Product Manual

Using the Main Menu14

14.1.3 Configuring Snapshot Recording Settings

The system can be set to record snapshot images when a camera detects motion. These

snapshots can be viewed through the Search menu or can be attached to email alerts and

push notifications. The Snapshot tab in the Recording menu controls the quality and re-

cording parameters for each camera.

NOTE

In order to enable Snapshot recording, the following menu options must be configured:

• The Snapshot schedule must be enabled for times that you would like to save snapshots. See 14.3.14

Configuring the Snapshot Schedule, page 65.

• Snapshot recording must be enabled for motion detection in the Event menu. See .14.3.7 Configuring

Motion Detection, page 57.

To configure snapshot recording settings:

1. From the Main Menu, click

and select Recording>Snapshot.

2. Under Snap Number, select the number of snapshots the system will take when the

snapshot button is pressed.

#LX400071; r. 1.0/27734/27737; en-US