Full Product Manual

Using the Main Menu14

3. Configure the following settings for snapshots saved automatically from motion detec-

tion or the snapshot schedule:

• Channel: Select the channel you would like to configure.

• Mode: Select Timing for the system to take snapshots according to the snapshot

schedule (see 14.3.14 Configuring the Snapshot Schedule, page 65) Select Trig-

ger for the system to take snapshots only when triggered by motion detection

(snapshot must be enabled in the Motion Detect menu (see 14.3.7 Configuring Mo-

tion Detection, page 57).

• Image Size: Select the resolution for snapshots.

• Image Quality: Select the snapshot image quality between 1 (lowest) and 6

(highest)

• Snapshot Frequency: Select the number of snapshots (up to 6) the system will

take each time.

4. Click OK to save changes.

14.1.4 Creating Custom Channel Names

You can assign custom names to your cameras. For example, you can name your cameras

based on their location (e.g. hallway or front door).

To create custom channel names:

1. From the Main Menu, click

and select Channel Name.

#LX400071; r. 1.0/27734/27737; en-US