Full Product Manual

Using the Main Menu14

To configure Email Alerts:

1. From the Main Menu, click

and then select NETWORK > EMAIL.

2. Check Enable to enable email notifications.

If you want to use Lorex’s email server (recommended):

1. Select Lorex Mail from the Mail Select drop-down list to use the Lorex email server to

send out alarm notifications. This is the recommended setting.

2. Configure the following:

• Receiver: Enter the email address that will receive alerts.

• Sender: Enter the sender’s email address.

• Subject: Enter the subject line for the email alert.

• Attachment: Check to include a jpg image attachment of the camera.

NOTE

You must enable the Snapshot option for motion detection on each camera you would want to re-

ceive attachments. For details, see 14.3.7 Configuring Motion Detection, page 57.

• Event Interval: Enter the interval between alert emails.

• Health Enable: Check to enable health check emails. Health check emails will be

sent periodically to ensure that the system is functioning normally.

• Interval: Enter the interval in minutes for health check emails.

3. Click Test to send a test email.

4. Click OK to save settings.

#LX400071; r. 1.0/27734/27737; en-US