Full Product Manual

Using the Main Menu14

To configure network warnings:

1. From the Main Menu, click

and then click Event>Warning>Network.

2. Under Event Type, select the event type you would like to configure.

• Net Disconnection: The system has lost connection to the network.

• IP Conflict: More than one device on your network has the same IP address.

• MAC Conflict: More than one device on your network has the same MAC address.

• All: Configure responses for all network events.

3. Configure the following for the selected event type:

• Enable: Check to enable the selected event type.

• Show Message: Check to show a popup message when the selected event occurs.

• Send Email: Check to enable email alerts. You must configure email alerts before

you will be able to receive them (see 14.3.5 Configuring Email Alerts, page 55).

• Buzzer: Check to activate the system buzzer.

• Record Channel: If Net Disconnect is selected, you can set the system to trigger

recording after it loses connection to the network. Check Record Channel to ena-

ble video recording and select the channels you would like to record. Set the

amount of time you would like the system to record under Post_REC.

4. Click OK to save changes.

14.3.11 Storage

The Storage menu allows you to configure the recording schedule and hard drives con-

nected to the system.

#LX400071; r. 1.0/27734/27737; en-US