Full Product Manual

Basic Setup (LHV2000 Series)

6.10 Quick Access to System Information

To quickly open a window that displays vital system information:

• Right-click to open the Quick Menu and click Info. Enter the system user name (default:

admin) and password (default: 000000).

• Press the

button on the front panel.

• Press the ENTER button on the remote control.

NOTE

The QR code shown in the System Info screen can be scanned during mobile setup to enter the sys-

tem’s Device ID.

6.11 Connecting Cameras

6.11.1 Camera Compatibility

This system is compatible with 1080p MPX, 720p HD, and analog cameras. For a list of

compatible cameras, please visit www.lorextechnology.com/support.

6.11.2 About Lorex MPX Cameras

Lorex MPX cameras transmit high-definition video over BNC cable (such as RG59). They

use analog signals and can transmit video signals over long cable runs.

Lorex MPX cameras use a proprietary analog standard that only works with Lorex MPX

DVRs. MPX is not compatible with HD-SDI equipment.

6.11.3 Installing Cameras

CAUTION

Cameras differ in terms of installation or mounting instructions. Please see the documentation that came

with your camera(s) for specific installation instructions.

Installation Tips

• Test the cameras before permanent installation. Plan where you will route the wiring for

the camera and where you will aim the camera.

• Mount the camera where the lens is away from direct and intense sunlight.

• Plan your cable wiring so that it does not interfere with power lines or telephone lines.

• Ensure that the camera wiring is not exposed or easily cut.

• Mount the camera in an area that is visible, but out of reach.

#LX400060; r. 1.0/24102/24107; en-US