Full Product Manual

Using the Main Menu15

responses to motion detection events, such as activating the system buzzer or sending an

email alert.

To configure Motion Detection events:

1. From the Main Menu, click and then click Event>Motion>Motion Detect.

2. Under Channel, select the channel you would like to configure.

3. Check Enable to enable motion detection on the selected channel.

4. Click Setup next to Region to configure which areas of the image will be enabled for

motion detection. A grid will appear on the monitor.

Motion Grid

• Areas enabled for motion detection are shown in color and areas that are disabled

are transparent.

• Hover the mouse at the top of the screen to select which motion area you would like

to configure. You can set up to 4 motion detection areas and customize the sensitiv-

ity and threshold for motion detection separately for each area between 0 (lowest)

and 100 (highest).

• The Sensitivity determines how sensitive the camera is to motion. For example, if

the sensitivity is high, small amounts of motion are more likely to trigger an event. It

is recommended to select a Sensitivity between 30~70.

• • The Threshold determines how much motion is required to trigger an event. If the

amount of motion exceeds the threshold, an event occurs. It is recommended to se-

lect a Threshold between 10~50.

• Right-click when finished.

#LX400060; r. 1.0/24102/24107; en-US