User Manual

1. LEFT-CLICK:
• During split-screen display mode:
Click an individual channel to view it in
full-screen. Click again to return to the
split-screen display mode.
• While navigating menus: Click to open
a menu option.
2. RIGHT-CLICK:
• During live view: Right-click anywhere
on the screen to open the Quick Menu.
• Within system menus: Right-click to
exit menus.
3. SCROLL WHEEL:
Using the Mouse
Setting the Date and Time
LHV5100_SERIES_QCG_EN_R1
NOTE: In live view, hover the mouse cursor over the bottom of the
screen to open the Navigation Bar. Move the mouse cursor away
from the bottom of the screen to close the navigation bar.
1. In live view, right-click and click Main Menu.
2. Log in using the system user name (default: admin) and your
new, secure password.
Enter the current time and
select your time zone, and
click OK.
It is important to set the correct time to ensure accurate time
stamps on video recordings.
Check DST to enable auto
Daylight Savings Time
updates.
(Optional) Check NTP to
sync your system with
an Internet time server.
Click Manual Update to
instantly update the time.
NOTE: A constant Internet
connection is required to
use NTP.
3. Click and select Setting.
4. Click General and select the Date&Time tab.
5. Click Apply to save changes.
Quick Access to System Information
To quickly open a window that displays vital system information
such as device ID, firmware version and device IP address:
• Press the ENTER button on the front panel.
• Right-click to open the Quick Menu and click Info.
If prompted, enter the system user name (default: admin)
and your new, secure password.
OR
When using your system for the first time, you will be prompted to
create a new 6 character password.
1. Connect your system according to the instructions on the front
of this guide.
2. When the DVR turns on, create and confirm your new, secure
password. This password will be used to connect to your
system from now on.
Creating a New Password
Record your password below and store in a secure place:
Playback and Search
1. From live view, right-click and then click Playback.
2. Log in using the system user name (default: admin) and
your new, secure password.
3. Use the calendar on the right to select the date to
playback.
4. Use the drop-down menus to select the channels you
would like to playback. Click the display options (
)
to playback multiple channels simultaneously.
5. Click inside the video bar to select the playback time.
Playback starts immediately at the selected time.
Select the day
to playback.
Select channels
to playback.
Click inside the
bar to select a
playback time.
Using the Quick Menu
Right-click to open the Quick Menu.
Select camera/live display view
Control PTZ cameras (not included)
Adjust camera color and image settings
View system information
Start/stop sequence mode
Search and playback recordings
Open manual recording controls
Open Main Menu
Disable current audible warning
3
21
Quick Connection Guide
4K MPX Multi-Format Security DVR
LHV5100 Series
• During live view: Use the scroll wheel to zoom in / out.