Use and Care Manual

103
iPad App
English
3. Tap Network then WiFi Network.
4. Slide Wi
Fi to ON to enable WiFi on the camera and scan for available networks.
5. Tap a WiFi network and enter the password to connect.
• To connect to a hidden WiFi network, tap Other. Ent
er the SSID and select the security
type and tap Done. Tap the network name from the list and enter the password.
6. Wait for the update to complete.
7. Remove the Ethernet cable from the camera. It will connect to the WiFi network.
When it is c
onnected, the blue Network LED will be on or flashing.
8. Tap next to the camera to exit the edit camera screen.
9. Tap the camera in the Camera List to connect. If you cannot connect, check to make
sur
e you have entered the correct wireless password and that the camera is in signal
range of your wireless router.
6.4.10 ENABLING EMAIL NOTIFICATIONS
Configure email alarms. The camera can be set up to send email alerts when motion is
detected. Email alarms include a .jpg attachment.
To enable email notifications:
1. In Camera List, tap next to the camera.
Slide Wi-Fi to ON
Tap your WiFi
network
Tap Other to
connect to a
hidden network