Use and Care Manual

122
Android App
directly to the notifications area on your device.
To enable Push Alarm Notifications:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Alarm Notific
ation.
3. Under Motion, t
ap to select ON to enable Push Alarm Notifications when motion is
detected using video motion detection or OFF to disable.
4. Under PIR, tap t
o select ON to enable Push Alarm Notifications when motion is
detected using the PIR motion sensor or OFF to disable.
5. Under Sound, t
ap to select ON to enable Push Alarm Notifications when sound is
detected by the camera or OFF to disable. Under Sound Sensitivity, select a
sensitivity for Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Updat
e to save your settings.
7.3.8 EDITING CAMERA WIRED NETWORK SETTINGS
Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
Push notification sent to
device notifications list
Enable/disable push notifications for
video motion detection
Enable/disable push notifications for
sound
Select sensitivity for sound push notifications
Enable/disable push notifications for PIR
motion detection