Use and Care Manual

135
Configuring Camera Settings using a Web Browser
English
IP.
To configure the camera to use DHCP or fixed IP:
1. Select one of the following:
• Obtain an IP ad
dress automatically (recommended): Use DHCP and allow the
camera to obtain an IP address from the router automatically.
• Use the following IP address: Use a fixed IP address and manually enter the IP
address information.
2. If you selected Use the following IP address, configure the following:
• IP a
ddress: Enter the IP address the camera will use. Make sure it is available on
your network.
• Subnet mask: Enter the Subnet Mask.
• Default Gateway: Enter the Default Gateway address.
• Obtain DNS server address automatically: Select to have the camera automatically
select a DNS server.
• Use the following DNS server address: Select and then manually enter DNS server
information.
3. Click Sa
ve & Apply.
8.2.2 WIFI SECURITY (CONFIGURING WIFI SETTINGS)
Configure the camera to connect to a WiFi network and configure WiFi settings.