Use and Care Manual

147
Configuring Camera Settings using a Web Browser
English
is full, or select Stop recording to have the NAS device stop recording video when
the available space is full.
3. Under Use NAS IP Address, enter the local IP address of the NAS device. OR, click
NAS Scan to scan your network for connected NAS devices. Then, click the name of
your NAS device from the list to add the NAS name.
NOTE: N
AS Scan only works with certain models of NAS devices. If your device does not
appear, enter the NAS IP address under Use NAS IP address.
4. Under Shar
ed folder name, enter the folder on the NAS where you would like to save
recordings to. Enter the folder name in all lower case letters and no slashes. This
folder must be located in the main (root) folder of the NAS device and must allow
read/write access. For example, the folder
public is an acceptable record folder, but
the folder
public/recording is not an acceptable record folder.
5. Under N
AS access account, enter the admin user name of your NAS device. See your
NAS device’s instruction manual for details.
Select Recording
option
Select Overwrite
settings
Enter local IP
of NAS device
Scan for NAS device (only works
with certain NAS models)