Use and Care Manual

L-View 116 Software

3.3.4 CONFIGURING MOBILE STREAMING SETTINGS

Configure streaming settings when connecting using a smartphone or tablet to connect.

To configure mobile streaming settings:

1. Right-click on the camera you want to configure and click Mobil

e settings.

2. Under Bandwidth, sel

ect your available mobile bandwidth. If you are primarily

connecting using WiFi, you may set this setting higher.

3. Check Sel

ect resolution and frame rate automatically to have the camera

automatically select the resolution and frame rate based on available bandwidth. If

you leave this unchecked, configure the following:

• Under Resolution, sel

ect the resolution that will be used when connecting to the

camera using a smart phone or tablet: 640x480 (VGA), 320x240 (QVGA), or 160x120

(QQVGA).

• Under Frame rate, select the frame rate that will be used when connecting to the

camera using a smart phone or tablet between 30fps (highest) and 1fps (lowest).

4. Under Micr

ophone, select Enable to enable audio streaming to smart phones and

tablets or Disable o disable audio streaming to smart phones and tablets.

5. Click Update t

o apply changes to your camera. Enter the admin username (default:

admin) and password (default: left blank) for the camera and click OK.

6. The camera will disconnect when the setting is changed. Doubl

e-click the camera in

Camera List to reconnect.

Select Bandwidth

Select Resolution and Frame

Rate for mobile streaming

Enable or disable audio

streaming to mobile device