Installation Guide

Information in this document is subject to change
without notice. As our products are subject to continuous
improvement, Lorex Corporation and our subsidiaries reserve
the right to modify product design, specifications and
prices, without notice and without incurring any obligation.
E&OE © 2015 Lorex Corporation. All rights reserved.
Software and complete
instruction manual available on:
www.lorextechnology.com/support
PACKAGE CONTENTS:
HDMI Cable
NVR
Quick Start Guides
Power Adapter
Ethernet Cable
USB Mouse
Connecting your system
*Not included/sold separately
1
4
3
5
Router*
Monitor/TV*
Cameras*
Mouse
Power
2
HDMI
VGA*
OR
HD Network Video Surveillance Recorder
LNR110 Series
Quick Connection Guide
30 Minutes
8-channel configuration shown. Other channels will have the respective number of video inputs. For camera compatibility
information, visit www.lorextechnology.com/support
This system features automatic firmware
upgrades for enhanced functionality. It is
required to upgrade your system to
the latest firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click
OK to upgrade.
2. The system will download and install the
firmware upgrade. Wait for the firmware
update to complete. The system may restart
during the firmware upgrade process.
DO NOT power off or disconnect
the power cable during firmware
installation.
For best performance it
is recommended to use
a 1080P monitor/TV
and set the DVR’s output
resolution to 1920x1080.
See the instruction manual
for details.
!
It’s all on the web
LNR110_SERIES_QCG_EN_R1
Ethernet Extension Cable*
NOTE: It may take up
to 1 minute for cameras
to start up and transmit
video to your NVR.
Recommended: Connect
cameras to NVR
OR
Connect cameras to a PoE
Switch* or Router* on your
network. See “Adding cameras
from the LAN” on reverse for
more details.