Full Product Manual

Network Setup (This Section is for Advanced Users Only)

To enable static IP addressing:

NOTE

• A static IP address is not required for remote access to the system.

• You may have to configure your router settings if the DHCP server is enabled.

1. Tap , then go to General Settings > Network Setup > Advanced Setup.

2. Tap Static IP. A Static IP configuration screen appears.

3. Tap the text box next to the IP Address field. A virtual numeric keypad appears on

screen.

NOTE

• 1: Number Keys

• 2: Backspace

• 3: Confirm entry

4. Tap each value inside the text box to move the cursor.

#LX400069; r.28523/28523; en-US