User Manual

4 Installation

4.2 Installation (Indoor / Outdoor)

CAUTION

• Make sure to disconnect the power cable before installing the cam-

era. Camera will begin moving immediately when power cable is

connected.

• Make sure to install the camera in a location that can support the

camera weight.

To install the camera on a wall:

1. Attach the included rubber ring to the back of the wall mount to ensure

the weatherproof rating of the camera.

2. Use the included Allen key to attach the M6x14 screws (3x) to the wall

mount. Do not tighten all the way.

1. Wall Mount

2. M6x14 Screws (3x)

3. Use the included wall mount to mark holes for the mounting screws

(4x) and cables. Drill holes (drill bit size – 3/8”) to a depth of 2.8”/

70mm in the mounting surface where marked.

4. Insert the included anchors (4x) into the holes and tap them into the

wall with a hammer.

#; r. 9.0/56187/56187; en-US 9