User Manual

6 Changing PTZ Protocol and Video Format
6.3.2 Setting the Camera ID (Address)
The camera ID is how the DVR identifies PTZ cameras. Camera ID is set
using the first 8 switches as show in the above diagram. Each switch repre-
sents a binary digit (i.e. switch #1=1, #2=2, #3=3, etc.). Camera ID can be
anything between 1–255. You cannot use the same ID for more than 1 PTZ
camera, and you cannot set an ID value of 0.
NOTE
By default, the camera ID is set to 1. If you only have one PTZ camera,
you do not need to change the camera ID.
Address
(ID)
Switch is ON or OFF
1 2 3 4 5 6 7 8
1 OFF OF-
F
OFF OFF OFF O-
FF
OF-
F
OF-
F
1 ON OF-
F
OFF OFF OFF O-
FF
OF-
F
OF-
F
2 OFF ON OFF OFF OFF O-
FF
OF-
F
OF-
F
3 ON ON OFF OFF OFF O-
FF
OF-
F
OF-
F
4 OFF OF-
F
ON OFF OFF O-
FF
OF-
F
OF-
F
5 ON OF-
F
ON OFF OFF O-
FF
OF-
F
OF-
F
6 OFF ON ON OFF OFF O-
FF
OF-
F
OF-
F
7 ON ON ON OFF OFF O-
FF
OF-
F
OF-
F
#; r. 9.0/56187/56187; en-US 25