User's Manual

QLR1660 User Manual
30
▪ Filtering: Setup the network filtering. You can appoint IP address that will be denied connection. Also, within the IP
address range, you can appoint specific IP addresses to accept.
- Denied IP address:
Input the IP address that will be denied.
- Accepted IP address in denied:
Input the IP address that you wish to be
exempted from the denied IP range.
You can control the network connection to the
QLR1660 Server efficiently by filtering IP
address.
[NOTE]
* When use the Internet Gateway (IP Sharer), you should set below;
1) QLR1660 Server Computer Setting: The Internet Protocol (TCP/IP) Settings of your Computer should be set to ‘Use
the Static IP’ because this Computer is used as the Virtual Server for
QLR1660.
2) Internet Gateway (IP Sharer) Setting: You should set Virtual Server Setting required for QLR1660 Server in your
Internet Gateway (IP Sharer).
=> Port Numbers for Video and Audio and P/T/Z camera and Remote Search of
QLR1660 Server will be each fixed -2000, 2001, 2002, 2003- as the video port
number (2000) inputted. These Ports must be opened to permit Client and
Search connection via external network.
3) Firewall Setting: Port Numbers for Video and Audio and P/T/Z camera and Remote Search -2000, 2001, 2002, 2003 –
have to be opened to permit Client and Search connection via external network.
* For the detail contents of 2) and 3) sections, refer to your IP Sharer and Firewall manuals.