User's Manual

QLR1660 User Manual
36
2-6. Speaker, Relay out Setup
▶ Speaker out
▪ Speaker out Enable: If checked, speaker output is enabled.
▪ Wave file: Setup the wave file for speaker output. (Use ‘Play’ to hear the file in advance.)
▪ Working time: Schedule the time frame during which the speaker will be able to activate.
▪ Alarm duration: Setup the duration that the output will sound when an alarm occurs. (1~60 sec)
▪ Delay time: Set a desired delay time. The speaker will sound after this delay time expires. (1~10 sec)
* Speaker associated with motion/sensor will be operated according to Setup in here when event occurs.
▶ Relay out
▪ Relay out Enable: If checked, the relay output is enabled.
▪ Description: A description of the relay or function may be entered in this location.
▪ Working time: Schedule the time frame during which the relay will be able to activate.
▪ Relay duration: Set the duration that the relay will activate when an alarm occurs. (1~60 sec)
▪ Delay time: Set a desired delay time. The relay will activate after this delay time expires. (1~10 sec)
*The relay that is associated with motion/sensor will activate according to settings in here when an event occurs.
* If you click ‘RELAY’ buttons, the connected relays will activate immediately according to the Relay setup.