User's Manual

DIGITAL VIDEO RECORDER

(3) Selecting the recording data for playback on timetable

The recorded information of the selected date is shown on a timetable. You can see the recorded information by

channel, time and event.

Select a channel for playback and click the point of time on recording bar. (The selected time indicator: blue line)

* You can move the time zone by scrolling using the scroll key (← / →).

▶ Screen Division: You can see the screen by various division modes of 4,8,9,10,13,16 channels with these buttons.

▪ 4-division screen (4-channels display): Four 4-division screens of A(1~4ch), B(5~8ch), C(9~12ch), D(13~16ch)

are alternated by clicking.

▪ 8-division screen (8-channels display): Two 8-division screens of A(1~8ch), B(9~16ch) are alternated by clicking.

▪ 9-division screen (9-channels display): Two 9-division screens of A(1~9ch), B(8~16ch) are alternated by clicking.

▪ 10-division screen (10-channels display): Two 10-division screens of A(1~10ch), B(7~16ch)

are alternated by clicking.

▪ 13-division screen (13-channels display): Two 13-division screens of A(1~13ch), B(4~16ch)

are alternated by clicking

▪ 16-division screen (16-channels display): 16-division screen of 1~16ch is displayed by clicking

*By double-clicking a channel on the screen, One channel screen of the channel and division screen are changed

alternately.

▶ Time Indicator: Display the real time of the recorded data is on playback. (Data of current time: blue line)

▶ Channel Select: Select the channel for playback (by 1-channel mode).

*By moving scroll bar located in right of timetable, use can see channel buttons from 1 to 16.

▶ Timetable: Display the recording data of the selected date by channel as bar of the various color.

*The colors of the bar indicate various types of recording:

( Green = Continuous Recording, Red = Motion Detection, Orange = Sensor, Pink = Pre-recording,

White line = Audio Recording )

▶ Select by Event: Use to see the recorded data by event.

▪ A = Display all types of recording.

▪ C = Display only Continuous Recording data. (Green)

▪ M = Display only Motion Detection Recording data. (Red)

▪ S = Display only Sensor Recording data. (Orange)

(4) Playback the selected data recorded

Use the following controls to adjust playback specs and direction.

Play tool▶ :

Fast Backward Play (x5)

Backward Play

Stop

Play

Fast Forward Play (x5)

*During play, the following buttons are disabled.

(Enabled during stop.)

▪ Scroll bar and data bar on timetable

▪ Setup, Bookmark, AVI, Panorama, Capture buttons

▪ Remote Search, Zoom in/out buttons

▪ Jump button

[NOTE] Speed of fast forward play and fast backward play

could differ according to PC system.