User's Manual

QLR1660 User Manual
58
Setup button
Click here to enter the Setup Mode.
[NOTE] The default password for user of Client is ‘1111’.
Search button
Click here to enter the Search mode.
You can search recordings by camera number, date, time and event.
[NOTE] The default password for user of Client is ‘1111’.
Shutdown button
Click this button to shutdown the main server application.
[NOTE] The default password for user of Client is ‘1111’.
Pan/Tilt/Zoom
Control buttons
It enables you to control remotely the P/T/Z camera that you select to
move and get the scene according to your direction dynamically.
- The following controls are available:
Camera Selection to control Pan/Tilt/Zoom/Focus
Tilt up/down (/)
Pan left/right (/)
Zoom in/out (+/-)
Focus in/out (+/-)
Auxiliary (1,2,3)
(Refer to ‘Appendix -1.Pan/Tilt/Zoom Camera Installation’.)
Use for full-duplex audio communication with the QLR1660
Server system.
- Clicking the speaker button enables you to listen to the
sound transmitted from the connected QLR1660 Server.
- Control the volume by moving the volume control button.
Audio Speaker(On/Off)
/ Volume Control
buttons
[NOTE] For full-duplex audio communication with the QLR1660 Server system,
‘Audio recording and transferring' in System setup panel have to be enabled.
And, the Microphone have to be connected to sound card of computer and the
‘Microphone In’ at the Volume Control setup of windows have to be muted.
Connect button
Click to connect/disconnect with the Remote Server.
Recording On/Off
buttons
Schedule Recording button (
)
: You can enable Schedule Recording according to Setup by clicking the ‘Schedule Rec.’
button.
[NOTE] If ‘Schedule Rec.’ button is off, all kind of recording (video and audio) components
configured in the Setup mode are disabled
Group buttons (A,B)
: By clicking each group button (A,B), displays 8 channel recording buttons belongs to each
group
Channel Recording buttons (1~16)
: Using these buttons, you are able to record each channel by clicking the desired channel.
The Continuous record icon (
) will be displayed on the camera screen.