Quick Start Manual

Edge Touch Screen Monitor Setup

Step 1 of 3: Connect the cables

The USB cable must be connected to the monitor’s USB port

and the DVR’s USB port to enable the touch screen function.

DVI Port

USB Port

Power Port

AC power cord

DVI cable

16 channel configuration shown above. 8 will have the respective number of video inputs

USB cable

AC Power Cord: Provides power to the touch screen monitor.

DVI Cable: Transmits video from the DVR to the touch screen monitor.

USB Cable: Enables the DVR to recognize touch gestures on the monitor.

www.lorextechnology.com

PAGE 1
www.lorextechnology.com Edge Touch Screen Monitor Setup The USB cable must be connected to the monitor’s USB port and the DVR’s USB port to enable the touch screen function. Step 1 of 3: Connect the cables Power Port DVI Port USB Port USB cable AC power cord DVI cable 16 channel configuration shown above. 8 will have the respective number of video inputs AC Power Cord: Provides power to the touch screen monitor. DVI Cable: Transmits video from the DVR to the touch screen monitor.
PAGE 2
www.lorextechnology.com Step 2 of 3: Power on the Monitor Power LED Power Button • Press the power button to turn the monitor on. Step 3 of 3: Test the touch screen gestures: Tap, Scroll, Slide Before you start: 1. Turn on your Edge DVR. 2. Make sure your monitor is turned on by pressing the Power Button. 3. Wait for the DVR to boot into the main viewing mode. Tap Tap an icon (i.e. Menu icon) in the system tool bar to open a menu.