INSTRUCTION MANUAL Ultra Resolution Day & Night Dome Camera Ultra Resolution Day & Night Dome Camera P/N 01.BSM.11.0070201D V3.02 Vandal Models: DPV24D / DPV24TLX Indoor Models: DPD23D / DPD24D Please read this manual thoroughly before use and keep it handy for future reference.
INTRODUCTION Features All Models Feature: DPD24D • • • • • • • • • • • • Indoor Dome Model • 2.8-10.5mm Varifocal Day/Night Lens F1.4 DC Iris 1/3” Sony Super HAD™ II CCD Excellent low light performance using Polaris Vision 2 technology. 0.15 Lux / F1.2 (Color) 0.
MEASUREMENTS PACKING CONTENTS 97.0 mm 3.82 in Indoor Dome package contains the following: 55.5 mm 2.19 in 112 mm 4.4 in 3/4’’ -14 NPS thread 40 mm 1.57 in 3.4" 87 mm Ø 0.1" 3.5 mm 5.1" 130 mm 3.9" 100.0 mm Vandal Dome Dimensions Base hole positions 100° 112 mm 4.
JUNCTION BOX INSTALLATION TYPES VANDAL DOME FITTINGS 2S FITTING a. 2S Fitting requires only 2pcs of base attachment screws. Screws Cable Entry Note: You have a reduced space in which to hide cables using this type of installation. Recommended for indoor dome only. 4S FITTING Pendant Cap - model # MNTV2XPC Replaces the need for the camera base. Compatible with ceiling conduit installations Wall Mount - model # MNTV2XW a. 4S Fitting requires 2pcs of base attachment screws.
INSTALLATION. VANDAL DOME 1 DPV24TLX ONLY When using DC power, note the correct polarity stated on the label attached to the power cord. INSTALLATION. VANDAL DOME 4 4) Remove camera cover by squeezing the back and front of the cover as indicated by the “PRESS” indicators at the same time and lifting it up and away from the lens. 1) Remove the three tamper screws using the provided allen key.
INSTALLATION. INDOOR DOME (Surface Fitting) 1 1a) Press down on the tab marked with an arrow to lift up the dome cover slightly b a 1b) While pressing on tab, twist the dome cover counter clockwise just a few degrees to release dome cover from back clips. Lift off the cover. INSTALLATION.
CAMERA ADJUSTMENT CAMERA ADJUSTMENT Menu Setup LENS Using this function, you can control screen brightness. 1. Highlight 'LENS' in the main setup menu 2. Press the joystick to access the DC lens setup menu. 3. After completing setting update, highlight 'RETURN' to save setting and return to previous menu RCA Service Connector Use supplied RCA - BNC cable If you require BNC output. OSD function joystick. Pressing down on joystick acts as ENTER function. SETUP 1. LENS 2.
CAMERA ADJUSTMENT CAMERA ADJUSTMENT SENSE-UP BACKLIGHT (BLC) EXPOSURE SHUTTER AGC SENSE-UP BLC D-WDR RETURN The BLC menu is used to adjust backlight compensation function to sharpen subjects in backlight situations 1/60 MIDDLE AUTO OFF OFF RET Select digital slow shutter speed setting in order to allow extra light into the camera thereby providing higher sensitivity in low light conditions. NOTE only adjustable if SHUTTER setting is set to 'AUTO' or '1/60' - OFF : Deactivates the SENS-UP function.
CAMERA ADJUSTMENT CAMERA ADJUSTMENT Wide Dynamic Range (E-WDR) SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 4. DAY&NIGHT D-WDR : The D-WDR menu is used to adjust dynamic range of the camera electronically. This is especially useful in high contrast scenes in order to brighten up darker parts of the scene. 1. Highlight 'D-WDR' in the exposure setup menu. 2. Move the the joystick left/right to change setting to OFF/INDOOR/OUTDOOR.
CAMERA ADJUSTMENT CAMERA ADJUSTMENT DAY/NIGHT Digital Noise Reduction (3D DNR) The DAY/NIGHT menu is used to configure the day and night related settings for the camera. 1. Highlight 'DAY&NIGHT' in the main setup menu 2. Move the the joystick left/right to change setting to AUTO/COLOR/ B/W 3. Press the joystick to access the submenu's for AUTO and B/W settings SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 4. DAY&NIGHT This function reduces the background noise in a low luminance environment. 1.
CAMERA ADJUSTMENT CAMERA ADJUSTMENT SPECIAL. 1. Highlight 'SPECIAL' in the main setup menu. SETUP 1. LENS 2. EXPOSURE 3. WHITE BAL 4. DAY&NIGHT 5. 3DNR 6. SPECIAL 7. ADJUST 8. RESET 9. EXIT Notes • When the CAM TITLE is OFF no title will be displayed on the monitor even if you had previously setup a name. This is the master display setting. • Only English is available in this mode for camera title. • Only max 15 characters for the title allowed. DC AWB AUTO ON 2.
CAMERA ADJUSTMENT CAMERA ADJUSTMENT D-EFFECT: Applies digital effects to camera image. 1. Highlight 'D-EFFECT' in the SPECIAL setup menu. SPECIAL 1. Highlight 'MOTION' in the SPECIAL setup menu 1. CAM TITLE 2. D-EFFECT 3. MOTION 4. PRIVACY 6. SYNC 7.access LANGUAGE 2. Press the joystick to the submenu. 8. RETURN OFF OFF OFF INT ENGLISH END D-EFFECT Notes FREEZE MIRROR D-ZOOM NEG.
CAMERA ADJUSTMENT PRIVACY: Hide an area so that it is not displayed on the monitor. 1. Highlight 'PRIVACY' in the SPECIAL setup menu. 2. Move the the joystick left/right to change setting to OFF/ON 3. Press the joystick to access the submenu for ON setting - AREA SELECT: - AREA DISPLAY: - COLOR: TROUBLE SHOOTING PRIVACY AREA SELECT AREA DISPLAY COLOR RETURN AREA� ON |--------� RET Select privacy area number. AREA 1-8 With the area slected will be shown flashing on and off visually.
