Instruction Manual

124
Appendix O: Remote Viewing (Mac)
Logging Into Your System
Log in to your system to begin remotely monitoring the system.
To log in to the DVR:
1 In the User Name field, enter ad
min.
2 In the password field, leave the entry blank (default)
NOTE: By defa
ult, the user name is admin. The password field is left blank.
3 Click Login to
connect to the system.
NOTE: If you recently upgraded your system firmware, you will see the screen below during
the
initial connection. Follow the on-screen instructions to install the required
updates to begin live viewing.
Changing Viewing Modes
You can change the number of channels that the system displays simultaneously (i.e. split
screen mode, single channel mode etc.)
To change the DVR’s viewing mode:
• Click on one of the viewing mode buttons in the toolbar:
admin
Viewing mode buttons
Full Screen button