Instruction Manual

Rear Panel

16-channel

1 BNC Video IN: Connect up to 16 cameras.

2 Main & Spot Video Out:

• Main: Outputs the D

VR interface to a BNC connection. This allows you to see your mouse

cursor, and have full control of the system on a secondary monitor.

• Spot Video Out: Outputs the DVR interface to a BNC connection. This allows you to see the

DVR interface only, with no access to the mouse cursor.

3 Audio In: Connect up

to 4 RCA audio-enabled cameras (not included). BNC to RCA connectors

required (not included).

4 Audio Ou

t: Connect up to 2 output devices (i.e speakers, not included). BNC to RCA

connectors required (not included).

5 Audio In (Channels 5-16): Connect up to 12

RCA audio-enabled cameras (not included) using

the audio harness cable (BNC to RCA connectors required, not included). For details, see

“Appendix J: Recording Audio” on page 115.

6 LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

7 PTZ / Alarm Bl

ock: Connect a PTZ camera and Alarm Devices (not included)

8 On / Off Switch

: Turns the DVR on or off.

9 VGA Output: Connect a V

GA monitor (not included) to view the system interface.

10 USB Mouse port (top): Con

nect a USB mouse (included) for local system navigation.

• USB Port (bottom): Connect

a USB flash drive to upgrade the system firmware or as a media

device for video backup.

11 DC12V:

Connect the included AC power adapter to turn on the DVR.

5 7