Instruction Manual

36
Enabling / Disabling audio
recording
Audio recording requires
audio-enabled cameras (not included).
Depending on your DVR model, you will
have a different number of Audio-In
ports.
To enable / disable audio recording:
1 Beside th
e
Channel drop-down menu,
select the channel that you wish to enable/
disable audio recording.
2 Beside the
Audio drop-down menu, select
Enable or Disable.
3 Click Ap
ply to save your settings.
Adjusting Recording Modes
(Continuous/Schedule/ Alarm
Recording)
To adjust recording modes:
1 In the Channel drop-down menu, select
the
channel you wish to configure.
2 Beside the Rec
ord Mode drop-down menu,
select Continuous or Schedule.
• If you select Scheduled recording, click the
Schedul
e but
ton that appears. A Record
Schedule Setup window opens.
a. In the CH drop-down menu, select the
channel that
you wish to apply the
setting to.
b. Select the type of recording you wish to
apply: Alarm, Continuous, or No
Rec
ord.
c. Drag your mouse cursor to select the
time and day y
ou wish to apply the
settings to. The grid changes colors as
you apply the setting.
Optional: Under
the Co
py and To
drop-down menu, select the day that you
wish to apply the setting to, and then
click Copy. For example, you may want
to copy the setting to Mondays through
Thursdays only.
d. Click Apply to save your changes.
Configuring Backup File
Duration (Pack Duration)
The "Pack Duration" refers to the
duration of a backed up file in the
system. By default, a recording is
"packaged" into 15 minute video files.
To change the file "Pack Time":
1 In the P
a
ck Duration drop-down menu,
select the desired "Pack Time" duration (
15~60 minutes).
2 Click Apply
to save your settings.
Select recording type: Alarm, Continuous or No Record
Pack Duration