Instruction Manual

52
Using the Main Menu
Loading System Defaults
Loading the system defaults restores
the system’s configuration to the
factory settings.
To load system defaults:
1 F
rom the Advance Menu, click Sys
tem.
2 Click Load Default.
3 Select the menus that you wish to restore
to
default settings.
4 Click A
pply.
5 When the warning windo
w appears, click
OK to restore your settings.
6 Click OK when the
confirmation window
appears.
7 Click A
pply to save your settings.
Upgrading The System Firmware
The latest firmware version can be
found at www.lorextechnology.com.
Navigate to the appropriate product
page, and locat
e your system’s
firmware.
Firmware updates improve system
reliabil
ity, and may include new
features for the system.
NOTE: Upgrading the firmware
r
estores the system to factory
default settings.
To upgrade the system firmware:
1 Download and extract the firmware into a
blank
USB flash drive. The firmware
should be in a folder named dvrupgrade.
Ensure that this is the only folder in the
USB drive.
2 Insert the flash driv
e into the rear panel of
your system. Ensure the USB flash drive is
plugged into the appropriate USB port, and
not the USB mouse port.
3 Right-click and
from the sub-menu click
Main Menu>Advance>System.
4 Click Firmwar
e
Update.
5 Follow the on-screen instructions to
updat
e the firmware. Do not remove the
USB flash drive during the firmware
update. Wait for the system to reboot.
Firmware Update