Instruction Manual

Remote Viewing

Configuring PTZ Parameters

The system is capable of manipulating PTZ cameras (not included) that are connected to

the system. Please note that you will need PTZ information from the PTZ manufacturer’s

users guide.

To configure PTZ settings:

1 Click Re

mote Setting>Device>PTZ Parameters.

2 Configure the following:

• Channel: Select the channel that

the PTZ camera connects to

• Protocol: Select the protocol of the PTZ camera*

• Address: Select the address of the PTZ camera*

• Baud Rate: Select the baude rate of the PTZ camera*

• Data Bit: Select the data bit rate of the PTZ camera*

• Stop Bit: Select the stop bit rate of the PTZ camera*

• Verify: Select from Odd, Even, Mark, or Space.*

*Consult the PTZ camera’s instruction manual for protocol and configuration details

Optional: Click the Copy

Settings To button to copy the PTZ settings to different channels.

3 Click A

pply to save your settings.

For details on connecting a PTZ camera to your system, see “Appendix H: Connecting a PTZ

mera” on page 112.