Instruction Manual

80
Remote Viewing
2 Select a user from the User List that you wish to configure.
3 Configure the following:
• Active: Sel
ect Enable to add the user. Select Disable to remove the user.
• Pwd Enable: Select Enable to enable a user password.
• User Name: Enter the desired user name.
• Password: Enter the desired user password.
• Confirm: Re-enter the password.
4 Sel
ect the check boxes to enable the menus the user will have access to.
5 Click A
pply to save your settings.
To change the Admin Password:
1 Click Re
mote Setting>System>User.
2 Select ad
min in the user list.
3 In the Pwd Enable
drop-down menu, select Enable.
4 In the Password field, enter a new password.
5 Click A
pply to save your settings.
User List
Select menus that the users will have access to