Quick Start Manual

ACCWIFI1_QSG_EN_R1 Page 1
www.lorextechnology.com
WIFI REMOTE CONNECTION CRADLE
ACCWIFI1
QUICK START GUIDE
1
2
OR
OR
1 second
Getting Started
Connect the power adapter to the camera(s). Connect the other end to a power
outlet.
Turn on the camera(s).
Connect the cradle power adapter to the cradle. Connect the other end to a
power outlet.
4
5
Power/network
connector
Place the monitor onto the power/network connector on the cradle.
The monitor will charge when connected to the cradle.
It takes 5 hours to fully charge the monitor.
6
Download the free Lorex Care app for iOS or
Android™ on your smartphone or tablet.
See reverse to complete setup.
3
Connect the cradle to your router using an Ethernet cable (included).
INTERNET
NOTE: Ensure the switch on the back is set to INTERNET mode. DIRECT mode is
for service use only. Disconnect and reconnect the power adapter after changing to
INTERNET mode.
When someone is connected to the
cameras using a smartphone or
tablet, recording is stopped and you
will not be able to use the buttons or
menus on the handheld monitor.
See the WiFi Remote Connection
Cradle User Guide for more
information.
ATTENTION