Datasheet

Lorlin Electronics Ltd, Harwood Industrial Estate, Harwood rd, Littlehampton, W. Sussex BN17 7AT England
Tel [phone] Fax [phone] E-mail [e-mail]
1
GENERAL ELECTRICAL &
MECHANICAL SPECIFICATION
CK ROTARY SWITCH SPECIFICATION SHEET
o Made in UK
o Cost effective single wafer
switch
o Moulded 27.5mm diameter
o Standard 30º indexing
o Solder or Printed Circuit
Board Terminals
o Up to 4 poles per switch
o Maximum 12 positions
o Shorting (make before break 30º
indexing only) or non shorting
(break before make) contacts.
o Adjustable stop to restrict number
of positions
o Special options: 60ºor 90º indexing,
continuous rotation,
o Optional reinforcement ring.
o Fixed stop, UL-V0 rated
material, gold flashed or gold
plated contacts, and spindles with
special flats, slots or knurls.
o No Bush versions available
o Rear Drive versions available
o Sealed PCB Termination
available
Switch Rating: 150mA @ 250V ac/dc
Life: >10,000 Cycles
O
perating Temperature:
-
30ºC to +85 ºC
Proof Voltage: 1,500Vac (Initial)
Insulation Resistance:
>999 M at 500Vdc (Initial)
Contact Resistance:
<20 m (initial)
Operating Torque (nominal) Standard 8.6 ± 1 cNm
Light Action 3.5 ± 0.5 cNm
End Stop Torque (nominal): 0.80 Nm
Moulding Material: Polyamide 6.6 G.F.
Contact/Terminal Material: Brass CZ108 Ag Plated
CK ROTARY SWITCH
R
oHS
COMPLIANT
GENERAL FEATURES